Alaska Well Data › Prince of Wales-Hyder Census Area
Prince of Wales-Hyder Census Area, Alaska: well depth, water level & drilling cost
✓ 22 Alaska DNR records · verified 2026-10-19
Pull every recorded well near a Prince of Wales-Hyder Census Area address — $49
How deep are wells in Prince of Wales-Hyder Census Area, Alaska?
The median drilled well depth in Prince of Wales-Hyder Census Area is 105 ft, based on 20 wells with recorded depths in the state Alaska DNR database. Half of all wells fall between 64 ft and 159 ft; 90% are shallower than 215 ft. Wells drilled since 2016 have a median depth of 300 ft.
How much does it cost to drill a well in Prince of Wales-Hyder Census Area?
Applying published per-foot rates to the local median depth of 105 ft: drilling and casing alone typically runs $2,625–$6,825; a complete system including pump, pressure tank, and hookup typically runs $6,300–$10,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Prince of Wales-Hyder Census Area?
The median static water level is 12 ft below ground surface (middle half of wells: 10 ft–30 ft), from 17 measurements.
How much water do wells in Prince of Wales-Hyder Census Area produce?
The median tested yield is 10 gpm (middle half: 4 gpm–21 gpm), from 18 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Prince of Wales-Hyder Census Area?
Companies by number of wells completed in this borough, per the well logs Alaska drillers file with DNR.
| Driller | Wells since 2016 |
|---|---|
| AQUASOURCE LLC | 2 |
| Aquasource llc | 1 |
See every driller with wells on record in Prince of Wales-Hyder Census Area, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Prince of Wales-Hyder Census Area.
Method: medians computed from Alaska DNR records (Alaska DNR WELTS well logs, water-supply wells only (monitoring, test, grounding, geothermal, reinjection and recharge wells excluded); depths 0-5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.