Alaska Well Data › Kenai Peninsula Borough
Kenai Peninsula Borough, Alaska: well depth, water level & drilling cost
✓ 8,484 Alaska DNR records · verified 2026-08-23
How deep are wells in Kenai Peninsula Borough, Alaska?
The median drilled well depth in Kenai Peninsula Borough is 68 ft, based on 8,066 wells with recorded depths in the state Alaska DNR database. Half of all wells fall between 42 ft and 116 ft; 90% are shallower than 175 ft. Wells drilled since 2016 have a median depth of 91 ft.
How much does it cost to drill a well in Kenai Peninsula Borough?
Applying published per-foot rates to the local median depth of 91 ft: drilling and casing alone typically runs $2,275–$5,915; a complete system including pump, pressure tank, and hookup typically runs $5,460–$9,100. Actual quotes depend on site access, geology, and casing requirements.
Free for property owners. We route your request only to licensed drillers who actually file well logs in Kenai Peninsula Borough — never sold elsewhere.
What is the static water level in Kenai Peninsula Borough?
The median static water level is 34 ft below ground surface (middle half of wells: 17 ft–60 ft), from 3,292 measurements.
How much water do wells in Kenai Peninsula Borough produce?
The median tested yield is 15 gpm (middle half: 8 gpm–30 gpm), from 3,193 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Kenai Peninsula Borough address — $29
Drilled depth distribution
Who drills wells in Kenai Peninsula Borough?
Companies by number of wells completed in this borough, per the well logs Alaska drillers file with DNR.
| Driller | Wells since 2016 |
|---|---|
| NORTHERN SUPERIOR CONSTRUCTION | 53 |
| KRAXBERGER DRILLING INC | 27 |
| M-W DRILLING INC | 25 |
| SMITH WELL DRILLING | 25 |
| Blackwell Pump Service | 17 |
| Frostline Drilling | 15 |
| HEFTY DRILLING | 10 |
| Frostline Drilling and Construction LLC | 7 |
See every driller with wells on record in Kenai Peninsula Borough, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $29Method: medians computed from Alaska DNR records (Alaska DNR WELTS well logs, water-supply wells only (monitoring, test, grounding, geothermal, reinjection and recharge wells excluded); depths 0-5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.