Alaska Well Data › Denali Borough
Denali Borough, Alaska: well depth, water level & drilling cost
✓ 348 Alaska DNR records · verified 2026-08-23
How deep are wells in Denali Borough, Alaska?
The median drilled well depth in Denali Borough is 160 ft, based on 341 wells with recorded depths in the state Alaska DNR database. Half of all wells fall between 87 ft and 222 ft; 90% are shallower than 349 ft. Wells drilled since 2016 have a median depth of 158 ft.
How much does it cost to drill a well in Denali Borough?
Applying published per-foot rates to the local median depth of 158 ft: drilling and casing alone typically runs $3,950–$10,270; a complete system including pump, pressure tank, and hookup typically runs $9,480–$15,800. Actual quotes depend on site access, geology, and casing requirements.
Free for property owners. We route your request only to licensed drillers who actually file well logs in Denali Borough — never sold elsewhere.
What is the static water level in Denali Borough?
The median static water level is 90 ft below ground surface (middle half of wells: 49 ft–144 ft), from 238 measurements.
How much water do wells in Denali Borough produce?
The median tested yield is 20 gpm (middle half: 10 gpm–30 gpm), from 208 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Denali Borough address — $29
Drilled depth distribution
Who drills wells in Denali Borough?
Companies by number of wells completed in this borough, per the well logs Alaska drillers file with DNR.
| Driller | Wells since 2016 |
|---|---|
| PIONEER PEAK INDUSTRIES D/B/A VALLEY WELL DRILLING | 16 |
| R AND R DRILLING | 9 |
| M-W DRILLING INC | 5 |
| Valley Well Drilling | 5 |
| M-W Drilling, Inc. | 1 |
| PIONEER PEAK INDUSTRIES VALLEY WELL DRILLING | 1 |
| PIONEER PEAK IND VALLEY WELL DRILLING | 1 |
| PENN JERSEY DRILLING INC | 1 |
See every driller with wells on record in Denali Borough, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $29Method: medians computed from Alaska DNR records (Alaska DNR WELTS well logs, water-supply wells only (monitoring, test, grounding, geothermal, reinjection and recharge wells excluded); depths 0-5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.